The CP30 concrete mixing plant from Stetter has now proven its abilities at more than 1500 locations in India as
well in countless sites across the globe.
45 years of Stetter experience in the construction and production of concrete mixing plants has been
implemented in the newest development of the CP30. The concrete output is approximately 30m /h of
compacted concrete for a batch size of 0.5 m .
The plant design fully meets the requirements as a mixing plant for ready-mix concrete or as a plant at building
site. Other areas of use include the precast factories and concrete product industries. Additionally, it is also used
for mortar manufacturing.
The plant is available with a turbo pan mixer or with a planetary pan mixer for precast concrete production.
A special characteristic of the CP plant series is the large active and passive reserve provided by the star design.This gives you a high level of independence from the scheduled delivery of aggregates. The CP30 is especially compact when used with a compartment batcher. There are advantages in regard to the space required as well as when transporting the plant to other locations.
The plant design fully meets the requirements as a mixing plant for ready-mix concrete or as a plant at building site. Other areas of use include the precast factories and concrete product industries. Additionally, it is also used for mor tar manufacturing.
Inline Solo Version
If you use more than four types of aggregates, an in-line silo can be used for storage. Each aggregate component is stored in a steel or customer-owned concrete silo. If the aggregates cannot be delivered on time when large amounts of concrete are required, intermediate storage can also be built. A weighing belt that can be calibrated is installed for dosing the aggregates instead of a weighing container. After weighing, the conveyor belt transpor ts and delivers the aggregates into the feeder skip of the mixing plant. Feeding the in-line silo compar tments is done using a wheel loader or belt conveyor equipment.
Compartment Batcher Version
The CP30 with compar tment batcher is designed for individual situations where the plant location can be changed at low cost. It is an economical alternative to the in-line silo and the star batcher unit. The compar tment batcher consists of four individual compar tments with a total capacity of 40 cu.m. Dosing and weighing the aggregate takes place, as with a star batcher, directly in the feeder skip.
Star Batcher Mixer
With a star batcher, the aggregates are separated according to components and stored at ground level on a prepared surface. Depending on the concrete quality, you can use one type (mixed gravel) or separated fractions. The star batcher is fed using a scraper. Dosing and weighing the aggregates takes place directly in the feeder skip.
SOLID TECHNOLOGY FOR PRECISE CONCRETE PRODUCTION
STETTER PAN MIXER
Stetter pan mixers guarantee the production of high-quality concrete in all consistencies. They mix intensively using short alternating movements both horizontally and vertically. Therefore homogeneous concrete is produced with Stetter pan mixers with short mixing times and low energy input.
PROVEN AND RELIABLE TECHNOLOGY
The plant comes with a separate cement and water weigher for accurate dozing. The plant has easily transportable dimensions and can be setup quickly.
CONTROL SYSTEM THE OPTIMAL SYSTEM FOR EVERY SITUATION
FEATURES OF MCI 70N VERSION 3.0.*
Direct interfacing of weighing load-cells with the PLC Modules, Membrane key buttons, Alarm pop-up facility in both HMI and Laptop, SMS of critical alarms and production detail (optional), Generic Interfacing with third party software for SAP interface (optional).
FOR AUTOMATIC CONCRETE BATCHING
The MCI 70N batching plant is controlled by SIMATIC S7 PLC and HMI interface. Users can easily access the HMI via function keys. The user can quickly access the required menu by symbols and clearly marked buttons. Alarm pop-up facility is available in both HMI and Laptop. Full online status is possible in HMI unit. In the event of a power failure, theremaining batches can be viewed through HMI unit after power resumes. Full featured recipe editing control through HMI i.e, data change, copy & delete operations. Full featured Auto and Manual calibration of all weighers.
MEMBRANE KEY BUTTON
Instead of push buttons, membrane keys have been introduced in MCI70N VERSION 3.0. These membrane keys are used to operate the plant in manual mode. The key is built-in with indication LEDs that give status of the current operational function.
MAIN MENU MIMIC SCREEN
MCI70N SCADA software is an optional package of VERSION 3.0. MCI70N VERSION 3.0 comes with an option of selecting Laptop / operating panel for operating batching plant as Customer master, Site master, Recipe master and Truck master